RacerX
Professional Knucklehead; aka Jeffncs / RacerX
2A Bourbon Hound OG
Charter Member
Vendor
Supporting Member
Short update...
I ordered replacement rotor- hub assemblies so they’re matches in order to fix the passenger side hub issues described above.
On a longer note, I cut out and welded in a patch for the drivers side rust below the door. This side was more of a pain due to more extensive rust and a crack that went into the door sill. In the end, I’m happy with the result.
Next I’ll drop the fuel tank to work on the rear fender wells and the he rear valence.
Progress pics...
As it was before...
Cut out...
In progress...
Finished product before final body work...
This one will only require a skim coat of bondo...the way it should be!!! Not the bondo body panel that was there before!!
I ordered replacement rotor- hub assemblies so they’re matches in order to fix the passenger side hub issues described above.
On a longer note, I cut out and welded in a patch for the drivers side rust below the door. This side was more of a pain due to more extensive rust and a crack that went into the door sill. In the end, I’m happy with the result.
Next I’ll drop the fuel tank to work on the rear fender wells and the he rear valence.
Progress pics...
As it was before...
Cut out...
In progress...
Finished product before final body work...
This one will only require a skim coat of bondo...the way it should be!!! Not the bondo body panel that was there before!!
Last edited: