PCC Pic Thread

Eff I was worried you'd say that. They're proud of that thing for sure!
 
W9xarF7.jpg


oWUehtx.jpg
 
Last edited:
QC10 upper (side charging, non-recip), QC10 lower (glock w LRBHO), QC10 15” hadguard (made by SLR), QC10 16” 9mm barrel, QC10 9mm bolt, MVB stock w 9mm buffer/spring setup, KE arms SLT-2 flat trigger, Arisaka vertical grip, PA Cyclops prism with ACSS etched reticle and VG6 9mm brake.

C9EB5589-B7F7-4A7C-8F20-7747CC2B998A.jpeg
index.php
 
Those little buggers are a load of fun lol

Just got it a week ago, and then changed it up before the first shot. HBI handguard, trigger spring kit, safety lever, mag release, flash hider, and brace.

Put the first 70 rounds through it today. Absolutely love it so far.
 
Just got it a week ago, and then changed it up before the first shot. HBI handguard, trigger spring kit, safety lever, mag release, flash hider, and brace.

Put the first 70 rounds through it today. Absolutely love it so far.

Now ya need a couple stamps for it....it can be a wicked little setup :D

20181013_223814.jpg
 
Now ya need a couple stamps for it....it can be a wicked little setup :D


One step ahead of you. :D

Last week I paid for a Silencerco Octane 9.

This morning I paid for a Dead Air Ghost M. One of them will basically be a permanent fixture on the Scorpion.

Originally planned on sbr'ing it, but the brace works so well I don't see a need for it.
 
One step ahead of you. :D

Last week I paid for a Silencerco Octane 9.

This morning I paid for a Dead Air Ghost M. One of them will basically be a permanent fixture on the Scorpion.

Originally planned on sbr'ing it, but the brace works so well I don't see a need for it.

You have passed the test and are now allowed to stay :D

20181110_204226.jpg
 
What's the specs on that thing? I can't remember if I've asked that already. I know your all about that #lightweightlife

Well, this one isn't super lightweight. Didn't want to go too light. 5.56 you can go very light and still shoot very flat because the muzzle brakes are so effective.
So I wanted some weight on this guy. Not a ton but a little. Brakes don't really work much on these as you know.

Its:
Spikes glock lower w/
B5 grip
POF Flat trigger
Magwell (guy on enos made)
MFT stock
Short throw safety (not installed in pic)

Aero slick side Upper w/
Kaw Valley (Faxon) barrel w/ cheap ebay brake
Alg 12" w/ Arisaka finger stop
Kaw Valley BCG
Taccom buffer w/ short stroke kit

Cmore with tactical riser mount

Shoots pretty good! And fairly cheap.
 
Thanks for the info. I'm trying to figure out what to do with mine. It's piece milled and not conducive to steel challenge bc of the weight.
 
  • Like
Reactions: NKD
Recently purchased (2) G17 Sub 2Ks with full MCARBO.com and shipped them off to have upgrades install by Kel-Tec for a $40 flat rate fee.
Timing and weather has not allowed me to shoot either of these since recieving them back from KT. Looking forward to some steel target range time when the weather breaks.

BAC818F8-98AB-4C2E-AC33-723C1BBDC23E.jpeg

My blk Sub 2k prior to upgrades.

FFD0BDF0-B16D-433C-9A65-0B44D46EBE51.jpeg
 
Last edited:
I've got rifles with shorter barrels than this thing's magazine. :D
How many rounds can you cram in that thing?

57!

It's ridiculous.

Edit: it's quite weird to be able to load an entire box of ammo, then have to crack open another to fill it up!
 
Last edited:
Just finished some mods to the old Camp 9. Removed the magazine disconnect, now mags drop freely. Fixed an issue with the safety and put the rifle back in the original Burch
wood stock after removing the old stain finish. Went with 4 coats of hand rubbed BLO.

UITER0u.jpg


UKGOUOk.jpg


pAW0RLY.jpg


PAD0P9U.jpg
 
Last edited:
Back
Top Bottom