HK Rear drum sight tool

Disgruntled Seabee

Well-Known Member
Benefactor
Life Member
Joined
Mar 30, 2019
Messages
3,964
Location
NC
Rating - 100%
61   0   0
This is probably the dumbest thing I've ever used, but it's so simple. It took me an hour to figure out that the drum spins freely of the tool. I wanted to figure out out for myself instead of watching a boobtoob video. But now I'm happy I figured it out! :D1572801787796659671130682907891.jpg
 
Lol. Been there. Have same tool.

I sighted mine in at 100 using the 200 apperature, that v notch is crazy.
 
Last edited:
I have one and need to adjust the sights on my MR556. Do you all know which way to dial for moving shots up or down? I don't have instructions with the diopter sights. Right now, my shots are hitting lower than point of aim, so I want to adjust the sight to make my impacts consistent with point of aim.
 
I have one and need to adjust the sights on my MR556. Do you all know which way to dial for moving shots up or down? I don't have instructions with the diopter sights. Right now, my shots are hitting lower than point of aim, so I want to adjust the sight to make my impacts consistent with point of aim.
I wrote in sharpie on the side of my gun: Clockwise -down Counterclockwise-up15728784601328162090437295670717.jpg
Edit: Acetone cleans it off good
 
Last edited:
Dialing it down (clockwise) will push your shots further down correct? If I want to raise my impacts, I'll need to dial it counter clockwise correct?
 
Dialing it down (clockwise) will push your shots further down correct? If I want to raise my impacts, I'll need to dial it counter clockwise correct?
You got it, that's why I wrote it on my gun, horrible short term memory lol!
 
Last edited:
Thanks! I was trying to think about how directionally, if I dialed it down, what that would do with my sight plane, but apparently it was reverse from what I wanted it to do.
 
Thanks! I was trying to think about how directionally, if I dialed it down, what that would do with my sight plane, but apparently it was reverse from what I wanted it to do.
I'm dreading having to adjust windage, not because of HOW to do it, but I dont want the sight to move after I adjust it
 
I'm dreading having to adjust windage, not because of HOW to do it, but I dont want the sight to move after I adjust it
Indeed. It's a pain in the ass. Once I get it set I'll likely just buy an Aimpoint.
 
Indeed. It's a pain in the ass. Once I get it set I'll likely just buy an Aimpoint.
I have a strike eagle coming for it, but theres no better feeling than hitting steel at medium-long range with irons.
 
Indeed. I actually like HK's irons over most others. SAN Sig sights are also just as good.
 
Back
Top Bottom