I picked up the HB Industries reduced trigger spring kit and installed it and the Theta trigger shoe on my daughters Scorpion pistol and wow!! The trigger pull is down to around 5lbs and the flat faced shoe is light years better than the stock trigger.
Installation of the spring kit required drilling out the welded trigger pack screw in order to get the trigger assembly out of the lower, that was a PITA but easily done with a cordless drill and patience, disassembly of the trigger pack isn’t overly complicated but it was a bit tedious.
I ran about 200 rounds through the gun this afternoon and it was a joy to shoot with the improved trigger.
So if anyone is looking to improve their Trigger on a Scorpion I can’t speak highly enough of the HB Industries products.
Trigger Shoe (they also have a forward set version)
https://hbindustries.net/store/shop/cz-scorpion-evo-3-theta-stock-trigger/
Spring Kit
https://hbindustries.net/store/shop/cz-scorpion-evo-3-s1-reduced-weight-trigger-spring-kit/
I also replaced the factory safety levers with these, IMO they are considerably better.
http://www.parkermountainmachine.com/store/p115/PMM_CZ_Scorpion_EVO_3_S1_Safety_Selector_Levers.html
Installation of the spring kit required drilling out the welded trigger pack screw in order to get the trigger assembly out of the lower, that was a PITA but easily done with a cordless drill and patience, disassembly of the trigger pack isn’t overly complicated but it was a bit tedious.
I ran about 200 rounds through the gun this afternoon and it was a joy to shoot with the improved trigger.
So if anyone is looking to improve their Trigger on a Scorpion I can’t speak highly enough of the HB Industries products.
Trigger Shoe (they also have a forward set version)
https://hbindustries.net/store/shop/cz-scorpion-evo-3-theta-stock-trigger/
Spring Kit
https://hbindustries.net/store/shop/cz-scorpion-evo-3-s1-reduced-weight-trigger-spring-kit/
I also replaced the factory safety levers with these, IMO they are considerably better.
http://www.parkermountainmachine.com/store/p115/PMM_CZ_Scorpion_EVO_3_S1_Safety_Selector_Levers.html
Last edited: