Fun with PVC.....yard quiver

pirate

CFF Charter Patriot
Charter Member
Charter Life Member
Benefactor
Supporting Member
Joined
Dec 17, 2016
Messages
1,336
Location
Fuquay Varina
Rating - 100%
4   0   0
Arrow yard quiver made from PVC pipe and a plastic toilet flange screwed to a section of 1x 6. I made 2 of them Works great. Also works good for arrow storage.
gKKSqOd.jpg


Bow Rack made from PVC.
CcZiq8w.jpg
 
Last edited:
I like it......I've been dragging one of my muck boots out with me to serve the same purpose, much to everyones amusement.
 
Nice! Do you keep it indoors when it's not in use? If not, might want to throw a cap on it, keep out the creepy crawlies.
 
Good job!

I did something similar, except I used a large bolt I had laying around and turned down the head so it would jam inside the ID of the pipe. I turned down the other end to a point. When I am ready to use it, I just jam it in the ground from wherever I want to shoot. I'm sure I have a pic of it somewhere....
 
NCLivingBrit said:
Nice! Do you keep it indoors when it's not in use? If not, might want to throw a cap on it, keep out the creepy crawlies.
I keep them in my archery cave when not using them.
 
I have one like that also that I made a couple years ago. I made these with the wood base so I could also use them to store arrows inside in the archery den. PVC is great to work with and being relatively inexpensive and light weight I have made several archery related items using PVC over the years.
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i6.photobucket.com\/albums\/y217\/jimcope\/Archery\/6cbc93bd-d013-470c-b4ae-6947509f0703_zpshor5rll7.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i6.photobucket.com\/albums\/y217\/jimcope\/Archery\/IMG_0774.jpg"}[/IMG2]
 
Last edited by a moderator:
I really need to make a bow/arrow rack for the yard. We pretty much just shoot one at a time, so I only need one. I have hangers on my target. But the yard is so unlevel the bow kickstands don't really work. The 4H group my daughter shot with had the stand alone arrow holders. They work great.
 
Best and cheapest thing I've seen yet for arrow quivers is to get a canvas bag or a gun sleeve then get golf bag sleeves for golf clubs. You can then pack as many as you can get into the gun sleeve, if course cut all to almost length of the arrow leave fletching out. Also with this you can get a small piece of styrofoam you can push into bottom before you slide sleeves in then if you got broadheads on it will keep them from going all over.

Sent from my 7040T using Tapatalk
 
For arrow holders while you're shooting get an old milk or drink case the plastic ones with the grate pattern sides and bottom turn it upside down and then just slide your arrow in one of the holes, once you're done shooting you can lay bow on it till you get your arrows. Cheap and simple

Sent from my 7040T using Tapatalk
 
Back
Top Bottom