10/22 Hand Crank Gatling Gun Kit

[Slappy McTrigger]

This thing is pretty cool. If you're ever over run by a hoard of rabid zombie squirrels this would be the ticket!!

http://www.tacticalinc.com/gatling-...num-brfor-rugerreg-1022reg-rifles-p-4916.html

 

[doose]

The ultimate in cool would be to develop one of these for the AR 5.56 platform.

Sent from my SM-J320V using Tapatalk

 

[Slappy McTrigger]

The ultimate in cool would be to develop one of these for the AR 5.56 platform.

Heck yea it would but I wouldn't want to pay for the ammo!!

 

[MadMardigan]

You'd need a left and right eject AR, even this on is going to eject brass up on one side.

 

[NCMedic]

You'd need a left and right eject AR, even this on is going to eject brass up on one side.

Could be done with AR 57 uppers since they eject out the magwell..... would be pricy to burn through all that 5.7 ammo though.

Sent from my SM-G935V using Tapatalk

 

[MadMardigan]

Could be done with AR 57 uppers since they eject out the magwell..... would be pricy to burn through all that 5.7 ammo though.

Sent from my SM-G935V using Tapatalk

Yeah, That would if you ran them side by side like the AR15s

 

[Slappy McTrigger]

You'd need a left and right eject AR, even this on is going to eject brass up on one side.

Could be done with AR 57 uppers since they eject out the magwell..... would be pricy to burn through all that 5.7 ammo though.

Sent from my SM-G935V using Tapatalk

You could build the device as the two uppers. One left ejecting and one right. The lower is the firearm so one would only need 2 complete lowers.

 

[Jerzsubbie]

You'd need a left and right eject AR, even this on is going to eject brass up on one side.

Left eject is easy, Stag makes them and Stag prices won't break the bank.

 

[MadMardigan]

You could build the device as the two uppers. One left ejecting and one right. The lower is the firearm so one would only need 2 complete lowers.

Do it with 2 80% lowers, Ghost of Gatling Stoner.

 

[MadMardigan]

Left eject is easy, Stag makes them and Stag prices won't break the bank.

Yup, that's what I was thinking.

To keep it simple, use like a cam out of a car where you have to lobes timed to fire with a 90 degree turn from each other, for a bonus, use the Fostech Binary trigger in each, 15 cranks and 60 rounds down range.

 

[MadMardigan]

Since we wouldn't need hand grips, use to screws to make a C bracket with bearings on each side.

 

[Jerzsubbie]

Yup, that's what I was thinking.

To keep it simple, use like a cam out of a car where you have to lobes timed to fire with a 90 degree turn from each other, for a bonus, use the Fostech Binary trigger in each, 15 cranks and 60 rounds down range.

I like your thought process but why 90 degrees? Make a custom cam with 6 lobes on each, offset from each other by 30degrees so you get 12rds/crank!

 

[MadMardigan]

I like your thought process but why 90 degrees? Make a custom cam with 6 lobes on each, offset from each other by 30degrees so you get 12rds/crank!

That makes the machining a bit more complex though.

I'll draw something up.

 

[Climberman]

Carolina Gunrunners had one of the rimfire ones for a while a long time ago.