3d printed TPU wipes (and other DIY measurements)

[some_kid6]

I'm bored and my roommate figured out the settings to print TPU. I could always punch out wipes from neoprene or buy some washers but what's the fun in that? I'll be trying it out soon with different infills but I'm pretty sure it's gonna need 100%.

 

[some_kid6]

Reddit link to CGS group summary on diy wipes

Sizes:

Dead Air Ghost
60A Neoprene McMaster Carr Part Number: 6"x6" - 1370N15
1.20" x 1/8", 1/4" center McMaster Carr Part Number: 30mm (1.18") Hammer Driven Hole Punch - 3418A3

DeGroat Nano
80A Polyurethane McMaster Carr Part Number: 6"x6", 1/8" - 8716K24 6"x6", 1/4" - 8716K27
11/16" x 1/8" or 1/4", 3/16" center (optional) McMaster Carr Part Number: 11/16" Hammer Driven Hole Punch - 3427A18

Energetic Vox (S and K)
70A Fabric Reinforced Silicon McMaster Carr Part Number: 2"x36" - 3635K17
1-1/8" x 1/8" McMaster Carr Punch Part Number: 1-1/8" Hammer Driven Hole Punch - 3427A26

Gemtech Aurora and Aurora 2
65A Urethane
1" x 1/8" McMaster Carr Part Number: 1" Hammer Driven Hole Punch - 3427A24

Knights XM-9
70A Urethane
1" x 1/8"

Thompson Machine Poseidon
50A Neoprene
15/16" x 1/8" (.45) McMaster Carr Part Number: 6"x6", 1/8" - 1370N15
15/16" x 1/4" (9mm) McMaster Carr Part Number: 6"x6", 1/4" - 1370N17
McMaster Carr Part Number: 15/16" Hammer Driven Hole Punch - 3427A23

Thompson Machine Wasp
50A Neoprene McMaster Carr Part Number: 6"x6", 1/8" - 1370N15
5/8" x 1/8" McMaster Carr Part Number: 5/8" Hammer Drive Hole Punch - 3427A17