3rd set of rings

KnotRight

Well-Known Member
Charter Member
Benefactor
Life Member
Joined
Dec 20, 2016
Messages
5,468
Location
Savannah, GA
Rating - 100%
4   0   0
I order 2 set of rings to mount a Sig Whiskey 3 scope. The first 2 were too low where the magnification ring was hitting the Picatinny rail. Just ordered an XX-high rail. If this does not work I will have to take the gun to one of the local shops to see what can be done.
 
I order 2 set of rings to mount a Sig Whiskey 3 scope. The first 2 were too low where the magnification ring was hitting the Picatinny rail. Just ordered an XX-high rail. If this does not work I will have to take the gun to one of the local shops to see what can be done.

What is the host? What’s the size of the objective?

Pictures?
 
The rifle is a Savage Axis II 6.5 CM. I took the scope off and replaced it with a Nikon Bushmaster that would not sight in. Then I ordered the Whiskey 3. Had to take the mounts that came with the gun off and replaced it with a 4" Leupold rail because the tube on the Sig was too short. I rings was hitting the objective and the magnification knob. I needed about another 1/2 inch of tube to get the mounts to work. I am ready to shoot the gun and stop playing around with the scope.
 
Last edited:
Back
Top Bottom