I'm thinking about building a x39 pistol, and would appreciate advice from those that have done it before. Thinking about a 10.5" barrel, and will likely SBR it in the future. What parts have you had the best performance from?
Both my builds use mid length gas systems, and both also use ARP Superbolts. Both are the same except for barrels. My blaster uses a PSA nitride barrel, and my hunting rifle uses an ARP melonite barrel. Both have M4 ramps. On both builds I lapped the uppers faces to reduce side loads on the bolts. I was surprised to see how much metal comes out of brand name uppers before they are trued.Curious about pistol length gas system on a x39. The x39 uses a fairly gassy powder, so gas port may want to be smaller than standard, or adjustable.
Are either of your other x39 builds used much? I know I busted a bolt around 3k rds, and it's a very common issue.
I fought feed issues also, particularly with HP ammo and non M4 ramps.
Could be, pm me what you've got.Any interest in a 7"?
*upper
My blaster build will shoot 1.5" groups with Wolf 125 gr SP, and slightly less than 1" with my handloads. The ARP barreled rifle will shoot 1" groups with Wolf SP, and my best group with handloads is .625".I have 2 and my dad has 3 x39 rifles with carbine gas systems and have never had a problem with bolts, magazines , primers not igniting, or anything else on them and mine has about 2k rounds through it.
And my x39 AR is more accurate than an AK. There. I opened that door lol. Have fun with that
There's 5 or 6 of them between Dad and I. All are carbine gassed. Never a problem with any of themMy blaster build will shoot 1.5" groups with Wolf 125 gr SP, and slightly less than 1" with my handloads. The ARP barreled rifle will shoot 1" groups with Wolf SP, and my best group with handloads is .625".
PSA has a x39 carbine gassed upper on sale for $149 shipped right now, and I'm seriously thinking about getting one. I've never owned a carbine gassed x39, and your experience has eased my mind about trying one.