Cerakote from the forum?

Weaponworks is in mebane they do really good work.


Sent from my iPhone using Tapatalk
 
While we're on the subject of Cerakote...anyone from down around Cleveland/Rutherford/Lincoln/Gaston County on here do it?
Got a piece Im wanting done, too
 
draco88 said:
While we're on the subject of Cerakote...anyone from down around Cleveland/Rutherford/Lincoln/Gaston County on here do it?
Got a piece Im wanting done, too
Click to expand...
Carolina Firearm Coatings is on the west side of Shelby off of 74. I've never used the guys before but I see their shop when I head that way.


CHRIS
 
CHRIS_WNC said:
Carolina Firearm Coatings is on the west side of Shelby off of 74. I've never used the guys before but I see their shop when I head that way.


CHRIS
Click to expand...

Yep, I know exactly where they are. They are an option, but Id rather support a forum members business/side work first, if I can.
 
There is a new business in Wake Forest (Custom Caliber Arms) that does Cerakote.
They have an 07 FFL and 2 experienced coaters with prior experience. They will also soon offer Laser Engraving and other finishes for firearms.
I am the official photographer for this company and have an in house studio in their 5K sqft facility... unpaid volunteer who takes photos in exchange for free cerakoting. :)

hL8gYba.jpg

New Elite Series (Jungle) and H Series Graphite Black
I photographed this gun that belongs to a personal friend..

Thanks for the plug..CZfool68 :)
 
In another post I mentioned I build a lot of rifles for my wife and she loves the "Gun Candy" coatings...This is "Kraken" over Kel-Tec Navy Blue..

3OZvAta.jpg
 
TSConver said:
Bud at Carolina coating.
Click to expand...
Is that the one off Glenwood, like Angus Dr or something like that? If so, I've read about them but have not talked to them. It's right down the road from work, and I may call then to see if they can do something there.

Just wanted to keep it in the CFF community first.
 
TJ45 said:
There is a new business in Wake Forest (Custom Caliber Arms) that does Cerakote.
They have an 07 FFL and 2 experienced coaters with prior experience. They will also soon offer Laser Engraving and other finishes for firearms.
I am the official photographer for this company and have an in house studio in their 5K sqft facility... unpaid volunteer who takes photos in exchange for free cerakoting. :)

hL8gYba.jpg

New Elite Series (Jungle) and H Series Graphite Black
I photographed this gun that belongs to a personal friend..

Thanks for the plug..CZfool68 :)
Click to expand...

Is this also known as The Outdoor Sportsman?
 
Anyone know what price range it would be? I have a quote of about $200, that's upper, lower, and handguard 7 inch. It is an out-of-stock color so there would be some shipping and handling to get the color, which is included in that price.

EDIT- went for it. I'm going to see if he can order color and drop off parts when I can.
 
Last edited:
They're not far! Thanks for passing the shop name along. I've been looking to have some work done and all the coaters are too far. I may have to stop in one day.

Thanks again for sharing @TJ45 .
 
Last edited:
Cameronswmp9 said:
Is that the one off Glenwood, like Angus Dr or something like that? If so, I've read about them but have not talked to them. It's right down the road from work, and I may call then to see if they can do something there.

Just wanted to keep it in the CFF community first.
Click to expand...

I know this is an older thread , but I wanted to let everyone know that we are now doing cerakote .
Bud is doing the cerakote work here, so you should get the same quality that he has always provided.
 
rbrooks said:
I know this is an older thread , but I wanted to let everyone know that we are now doing cerakote .
Bud is doing the cerakote work here, so you should get the same quality that he has always provided.
Click to expand...

Yeah I really want to get a stainless slide coated, or at least refinished to matte or satin.
Where is this now? Can I make a future appointment, drop a slide off at open and pick it up before close?
 
Last edited:
MochaJoe said:
Yeah I really want to get a stainless slide coated, or at least refinished to matte or satin.
Where is this now? Can I make a future appointment, drop a slide off at open and pick it up before close?
Click to expand...
The shop is in New Hill, NC . You Can make an appointment for almost anytime , including evenings and weekends.

Phone is 919-360-1891

Address is 7685 Old US 1 , New Hill , NC
 
rbrooks said:
I know this is an older thread , but I wanted to let everyone know that we are now doing cerakote .
Bud is doing the cerakote work here, so you should get the same quality that he has always provided.
Click to expand...

Can you quote me a price on a lower/upper/7 inch HG AR15 in sky blue? PM is fine please.
 
ml9awfn.jpg


Custom Caliber Arms proprietary colors now available ...."Mad Money Green" to Tungsten fade..
I helped develop this color for my personal rifle (pictured)....I'm not the only one who has it on their firearm now....time to develop another unique color..:)
 
Last edited:
Bringing back an old thread. Any members have a cerakote business in WNC?
 
Or anyone who has used Carolina Firearm Coatings in Shelby and can provide a review?
 
barf said:
Or anyone who has used Carolina Firearm Coatings in Shelby and can provide a review?
Click to expand...
I have used them several times.

I have some specific surfaces on firearms parts I do not want coated with Cerakote.
I make CFC aware of those places and they mask or plug those areas. They have delivered exactly what I ask for every time. They are top notch.
 
Last edited:
Hashknife said:
I have used them several times.

I have some specific surfaces on firearms parts I do not want coated with Cerakote.
I make CFC aware of those places and they mask or plug those areas. They have delivered exactly what I ask for every time. They are top notch.
Click to expand...
Good to hear! Their prices seem fair as well. Thank you.
 
You must log in or register to reply here.
Back
Top Bottom