Coal...

[bigfelipe]

What's the recommended COAL for 147gr zombies? The ogive is very blunt. Having problems with them hanging up in the barrel rifling...

 

[Wolffy]

Assuming we're talking 9mm PCC, I had to go short with 147gr coated. Found them to work at 1.10. Otherwise I ran 1.12 in all my pistols

 

[mulletmaster]

I am at 1.125 for uncoated. I do have occasional issues with them hanging on the rifling on my Sig P6 and have to tap the slide to go into battery. I need to look into that some more for that guy otherwise no issues with a G19, XD or PF9.

Sent from my SM-J700P using Tapatalk

 

[GymB]

Ran a bunch at 1.115 last week, no problems, but if I was having your issue I'd shorten them and drop the charge a few tenths and work back up. Would expect to end up back between 3.2 and 3.4 of titegroup, but always good to be careful with changes.

 

[Beef15]

IIRC 1.115 or 1.12 was necessary in my pistol. Ogive is somewhat variable with cast lead, plunk a dozen before deciding.

 

[bigfelipe]

Assuming we're talking 9mm PCC, I had to go short with 147gr coated. Found them to work at 1.10. Otherwise I ran 1.12 in all my pistols

Glock 17/19

 

[bigfelipe]

Thanks guys... Gonna drop it down to 1.12 and go from there...