Form 1 suppressor finishing questions...

RSGentry

New Member
Joined
Feb 2, 2020
Messages
12
Location
Wake Forest
Rating - 0%
0   0   0
What lube do you all use for suppressor boosters, and does anyone have experience with trying rustoleum or krylon as a tube finish on titanium? I assume it wouldn't work because of the heat, but wondered if anyone has tried it?
Thanks!
 
You can use high temp paint, like grill/engine paint. Or you can DIY high temp air cure (c-series) Cerakote with a $5 PreVal sprayer.
 
The advantage of using high temp spray is you can touch them up at any time. I did one with flat primer gray:

3F9D6768-7EC4-4663-9C92-11D4699CC0BA.jpeg

I’m about to do a barrel with this:

7ABED450-72B5-42A4-AC45-A2B6E98B7F14.jpeg

I did six cans a couple years ago with the air cure cerakote:

141ACE2F-2A7A-42CC-83ED-2492D99DC6D6.jpeg

And if you don’t want to fool with it, we have a member here that will do them for $25 apiece. I redid all six of those above, plus some more recently, and had him coat them this time.

A78DAB3F-7062-4191-8DC9-2AE361C38874.jpeg

50E59F5D-1713-4A7A-85F7-AA997B2FA85C.jpeg
 
@RSGentry

Did you ever decide what you were going to use as a finish?
 
Back
Top Bottom