Help Wanted with CZ Scorpion

teamglock2002

Well-Known Member
Benefactor
Life Member
Supporting Member
Joined
Dec 20, 2016
Messages
7,450
Location
High Point NC USA
Rating - 100%
43   0   0
Need someone who knows how to replace parts in an CZ Scorpion Evo S1. Pistol

Thanks TG2002
 
Last edited:
Nothing I have after market parts to put on. Wanna enhance performance and avoid months at the gunsmith.
 
Last edited:
I have an early S1 and have replaced those same items aside from the mag release. The tough part is the trigger pack, so springs and safety. It require patience and a firm hand from what I recall. Being in the CLT area, I’m a little too far to help.
 
Trigger and springs I sent off to Shooters Element to have done. For $55, it was worth it to me. Charging handle, safeties, grip, mag release, etc were done by me and YouTube. If I can do them, anyone can do them (maybe even @Jeppo)
 
Trigger and springs I sent off to Shooters Element to have done. For $55, it was worth it to me. Charging handle, safeties, grip, mag release, etc were done by me and YouTube. If I can do them, anyone can do them (maybe even @Jeppo)

This is what I did, too.
My trigger pack also had that dumb tack weld to be world compliant. They dealt with that at no extra charge.
Everything else I did myself.
 
Trigger and springs I sent off to Shooters Element to have done. For $55, it was worth it to me. Charging handle, safeties, grip, mag release, etc were done by me and YouTube. If I can do them, anyone can do them (maybe even @Jeppo)
Have Dremel - Will Travel :D
 
Trigger and springs I sent off to Shooters Element to have done. For $55, it was worth it to me. Charging handle, safeties, grip, mag release, etc were done by me and YouTube. If I can do them, anyone can do them (maybe even @Jeppo)
You thinking about the same @Jeppo as I am? What you been smoking :p
 
@NoNameHaveI trigger spring,trigger, grip, mag release, safety, charging handle, Etc...
Do you know if you have the “world safe” trigger? That would make the trigger spring replacement a little more complicated. As other have mentioned shooters element does a complete trigger job for about $55 or so that I would recommend, and grip, charging handle etc. are easily done with YouTube tutorials.
 
The only thing that is going to give you hell is the trigger return spring.
With a little determination and a dash of profanity it will go right back together.
Otherwise it is all pretty straight forward gun plumbing.
The use of an indentured servitude pin is helpful getting the trigger/spring back in.
 
Last edited:
Back
Top Bottom