High quality, low cost custom Cerakote applicator in Huntersville, NC
- Thread starter Magdump
- Start date
- Replies 129
- Views 11,168
OP
Magdump
Well-Known Member
Yes, it works very well on polymer parts.
KitShickers
Well-Known Member
You have any examples of a multicam job? Preferably on an AR?
JustKeepSwimming
AKA dingleberry
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
KitShickers
Well-Known Member
I’m not on social media and unfortunately it won’t let me view without signing up. Is there a website?
OP
Magdump
Well-Known Member
You are welcome to come out to my shop and take a look at my work first hand. Just let me know.
OP
Magdump
Well-Known Member
I haven't done multicam yet. I'll look into it and try it on one of my guns in a couple weeks. If you could please post a pic of the pattern you are looking for that would be very helpful.
Last edited:
KitShickers
Well-Known Member
I’m looking for pretty much exactly like Crye Multicam if possible. Thanks
Hey i got a glock 21 gen 4 thinking of 2 tone. What ya got on offer and pricing. Also you are 18 mins away if not mistaken. Im in Charlotte university area
OP
Magdump
Well-Known Member
PM sent
backwoodsshooter
there’s always a method to the madness
BigWaylon
Head philatelist
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
Not sure I’ve ever asked, and don’t want to assume...can you receive items shipped to you and then ship them back? Specifically silencer tubes and ends. I have somebody needing some work done, but he’s in Georgia.
OP
Magdump
Well-Known Member
Sorry, I can't. Since I have a day job, I'm not at home during the day to receive packages.
Hi! Im located in Charlotte, could you quote me on a 870 12ga Receiver, parkerized removal and need something that looks good with nickel finish (Marine Magnum)
Sent from my iPhone using Tapatalk
BigWaylon
Head philatelist
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
Had @Magdump do another small job for me. Put a Lil P on my Henry Big Boy X and liked it enough I bought another one for my 8.5” 300BLK AR pistol that goes in my GGG bag.
Here’s the mount he Cerakoted FDE:
Put it (FDE high mount) on the Henry next to the other one on a black low mount just for comparison:
Here’s the AR pistol with a TRS-25 on it, also with a base he Cerakoted, plus a silencer be refinished.
...and with the Lil P:
Here’s the mount he Cerakoted FDE:
Put it (FDE high mount) on the Henry next to the other one on a black low mount just for comparison:
Here’s the AR pistol with a TRS-25 on it, also with a base he Cerakoted, plus a silencer be refinished.
...and with the Lil P:
BigWaylon
Head philatelist
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
Quick question for those that have had Roy (or anybody else) Cerakote something for you. He’s done at least 10 silencers for me, and I’m working on another one. Most have been in Graphite Black, with three in Magpul FDE. All look fantastic.
But I want to do something a little different on this one. Just not the same matte black that the rest have. It’ll be going on a black gun (15-22 pistol), so I’m trying to stay somewhat in that family, but thinking some shade of darker grey instead. He said he had three colors in stock right now that fit that description. I ordered up samples of those three plus the Graphite Black so I could compare them. Here’s what there is:
L->R: Cobalt, Tungsten, Graphite Black, Sig Dark Grey
(wish is was sunny outside to get a better pic)
I don’t think the Tungsten is really as light as it shows in the pic. Both it and Cobalt have a glitter type appearance, while the SDG is matte like the GB.
Anybody have any input on what you like and/or don’t like about Tungsten or Cobalt if you’ve had work done in those colors?
What I really think I want to do is make the tube Cobalt and the ends Tungsten. 😎
But I want to do something a little different on this one. Just not the same matte black that the rest have. It’ll be going on a black gun (15-22 pistol), so I’m trying to stay somewhat in that family, but thinking some shade of darker grey instead. He said he had three colors in stock right now that fit that description. I ordered up samples of those three plus the Graphite Black so I could compare them. Here’s what there is:
L->R: Cobalt, Tungsten, Graphite Black, Sig Dark Grey
(wish is was sunny outside to get a better pic)
I don’t think the Tungsten is really as light as it shows in the pic. Both it and Cobalt have a glitter type appearance, while the SDG is matte like the GB.
Anybody have any input on what you like and/or don’t like about Tungsten or Cobalt if you’ve had work done in those colors?
What I really think I want to do is make the tube Cobalt and the ends Tungsten. 😎
OP
Magdump
Well-Known Member
AK47 Custom Mixed Candy Blue and Graphite Black
Keltec P17 with Custom Mixed Candy Blue slide
Ruger LCP2 22LR Custom Mixed Candy Blue and Candy Grey
AR15 Geometric Camo Graphite Black, Blue Flame, Cobalt
AR15 Rainbow
AR15 Handguard in Custom Mixed Red Candy Metalflake
Toyota Front A-Arms in Aztec Teal
Desert Eagle in Burnt Bronze
Ruger EC9S grip frame in Black Cherry
Keltec P17 with Custom Mixed Candy Blue slide
Ruger LCP2 22LR Custom Mixed Candy Blue and Candy Grey
AR15 Geometric Camo Graphite Black, Blue Flame, Cobalt
AR15 Rainbow
AR15 Handguard in Custom Mixed Red Candy Metalflake
Toyota Front A-Arms in Aztec Teal
Desert Eagle in Burnt Bronze
Ruger EC9S grip frame in Black Cherry
Last edited:
OP
Magdump
Well-Known Member
Mini 30 barrel in polished Silver
Remington R1 with Bazooka Green Slide, Graphite Black Frame, Satin Aluminum controls
Shield frame and Laser in Robins Egg Blue
Jack Skull Lower airbrushed in various shades of Grey, Black and Red
STI Edge in Cobalt
Remington R1 with Bazooka Green Slide, Graphite Black Frame, Satin Aluminum controls
Shield frame and Laser in Robins Egg Blue
Jack Skull Lower airbrushed in various shades of Grey, Black and Red
STI Edge in Cobalt
OldSoldier60
Active Member
Hi, I have a Glock 48 that I want to recolor the slide. I live in Stanley and work in Charlotte so could get it to you in person. Is that something you could do? Thanks.
OP
Magdump
Well-Known Member
Beretta APX frame, Black Cherry
Dawoo DP51 slide in Cobalt
Glock 43 in Battleworn Yellow
Springfield XDs in Cobalt
Ruger parts in Gloss Black
I couldn't find a stainless Mini 30 to go with my Samson AT stock so I Ceracoated my blued Mini 30 in custom mixed Gloss Silver
Dawoo DP51 slide in Cobalt
Glock 43 in Battleworn Yellow
Springfield XDs in Cobalt
Ruger parts in Gloss Black
I couldn't find a stainless Mini 30 to go with my Samson AT stock so I Ceracoated my blued Mini 30 in custom mixed Gloss Silver
I’ve been coming to Roy for 2.5 years now and we’ve done a ton of projects and this thread just scratches the surface of it really. If you’re on the fence about Cerakote, jump off of it and just do it. You won’t regret it. R
OldSoldier60
Active Member
BigWaylon
Head philatelist
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
@Magdump knocked it out again. This one is a Form 1 can built using a 4”x1.5” Ti tube and some Ti end caps that use a buffer tube castle nut wrench. The tube and threaded adapter are a slightly darker color (Cobalt) than the end cap (Tungsten). The samples showed a bigger difference in color, but nothing to complain about at all.
It just barely tucks inside the rail of my new 15-22 pistol after having the barrel cut down ~3/8” and the end cap modified:
I just wanted there to be no daylight. Very satisfied with the project!
It just barely tucks inside the rail of my new 15-22 pistol after having the barrel cut down ~3/8” and the end cap modified:
I just wanted there to be no daylight. Very satisfied with the project!
OP
Magdump
Well-Known Member
I sent you a text.
I'm in the process of moving to a new house. It will probably be a few weeks before I can cerakote again.
I had Roy Cerakote my new R9 to help with easy identification between it and my Res K. Once again, it came out great and pretty quick turn around.
Thanks to @BigWaylon for posting his pics of Cobalt and Tungsten, giving me a better idea of what I wanted. Ironically, I forget which one I chose 😂
Thanks to @BigWaylon for posting his pics of Cobalt and Tungsten, giving me a better idea of what I wanted. Ironically, I forget which one I chose 😂
@Jerzsubbie , I believe Roy left town a few months ago. Hope you’re doing well @Magdump.
BigWaylon
Head philatelist
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
He posted on 11/25 he’d be here until Sat (which would’ve been the 27th)…😢
Oooh, I must’ve missed that. Thanks guys.
Carolinatlc
Member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Member
Benefactor
Life Member
Multi-Factor Enabled
Yeah, this stinks. I texted Roy a couple months ago hoping to get some stuff done. Any other reasonable options in the area?
The reason I tagged my friend was because he was thinking about getting some work done by a guy in Concord so I recommended Roy. The Concord shop is close to 2x Roy’s prices. PM me if you want the name, so I’m not trampling on Roy’s thread.
I agree I really appreciated his work! So I've been wanting to have my cz82 done but since he is gone I just rattle can it myself black the slide of the pistol.
JustKeepSwimming
AKA dingleberry
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
He definitely does/did great work and hooked my wife up with her two Shields cerakoted...one in prison pink and one in zombie green.
I will never forgive him for having those colors in stock 😂
I will never forgive him for having those colors in stock 😂
I knew I shouldn't have put off my drug lord gold WASR project.