Hodgdon H110 dispenser

[Tomeguns]

Hi , I need to get a new powder dispenser for using H110 my lee aint cutting it as it is so fine a powder it leaks from mating surfaces. What are you guys using?

 

[steelciocc]

I'm using a basic RCBS powder flow with H110. Never noticed any leakage : )

 

[Ikarus1]

I lapped the drum halves of my Lee PPM with toothpaste and it fixed the leaks with fine ball powder. And it was Colgate fwiw

 

[Zedhound]

Hi , I need to get a new powder dispenser for using H110 my lee aint cutting it as it is so fine a powder it leaks from mating surfaces. What are you guys using?

Let me make a suggestion that has worked for me without it leaking a single grain and its a 5 cent fix.

i'm assuming your using the double disk and its leaking between the disks?

Put the disks together and align them flush around the edges, then use painters tape to wrap around the crease along the outside. 2 rotations around works well to keep them from sliding around and leaking powder.

 

[Tomeguns]

I was thinking of an RCBS Uniflow.

 

[Ikarus1]

A baffle helps also....and all powder measures need one

 

[Tomeguns]

using lee perfect Powder measurer

 

[Catfish]

I used a Lee PPM with some success but to stop leakage I had to over-tighten the drum.
I have an RCBS Uniflow now and it has not leaked at all even with H110.

 

[Ikarus1]

Try taking the drum apart, clean it with soapy water, smear a dab of toothpaste, softscrub, auto polishing compound, put drum back together and work the handle a few dozeb times. Clean it up with rubbing alcohol, reassemble and try moderate screw tension. Bet u will find that leaks slow or stop completely for no money

 

[Ikarus1]

Also Lee is coming out with a new brass drum measure like the Uniflow called the Deluxe. Cost about 55 bucks

 

[Ikarus1]

Awesome!

 

[Tomeguns]

Any Eta when the Lee Deluxe will be out?

 

[Tomeguns]

Saw them on the net but everyone Out of stock