Howdy from Primary Arms in Houston, Texas!

Michael Branson

Michael Branson

New Member
Joined
Jul 26, 2018
Messages
18
Location
Houston, TX
Rating - 0%
0   0   0
Hello everyone, I'm Mike at Primary Arms down in Houston, Texas. I've been with PA since September of 2015. One of our employees spotted a discussion about our reticles here at CFF so I've created an account initially just to post in that thread.

If anyone ever has a question about Primary Arms optics products, I'm your guy, as I've been writing the user manuals on all optics products released since 2016 or so. You can message me here or email me directly at [email protected]. I'm PA_Mike on AR15.com and I think I've built up a reputation over there as an enthusiastic but honest representative of my company. Ask any question and you'll get an honest answer, with a very few exceptions where I'm just not allowed to say (which factory makes our latest scope, what the focal length inside the erector assembly is, stuff like that). I can't give away the secret sauce but otherwise I try to be a legit source for folks about what is really going on in the firearms industry and how we see it from our side of things. We are shooters too, we use the stuff we make. I'm the third guy from the left in the pic below, with the Magpul D60 mag stuffed in my double-stamper 10.5".

Pleased to meet ya'll!

PAcatalogcrew.jpg
 
Welcome to CFF, enjoy the forum
 
Awesome! Greetings and welcome to CFF Mike. Happy to have you and PA here.
 
I normally do post in the welcome area. But welcome. Glad to see someone from PA come here lol.

Keep up the sales on barrels lol. Not gonna lie, I have bought more from yall over the last 4-6 months than ever because of the barrel sales
 
Welcome, @Michael Branson , we're happy to have you with us. There are a lot of us here that are happy Primary Arms users.
 
Thanks for signing up!
 
Michael Branson said:
Hello everyone, I'm Mike at Primary Arms down in Houston, Texas. I've been with PA since September of 2015. One of our employees spotted a discussion about our reticles here at CFF so I've created an account initially just to post in that thread.

If anyone ever has a question about Primary Arms optics products, I'm your guy, as I've been writing the user manuals on all optics products released since 2016 or so. You can message me here or email me directly at [email protected]. I'm PA_Mike on AR15.com and I think I've built up a reputation over there as an enthusiastic but honest representative of my company. Ask any question and you'll get an honest answer, with a very few exceptions where I'm just not allowed to say (which factory makes our latest scope, what the focal length inside the erector assembly is, stuff like that). I can't give away the secret sauce but otherwise I try to be a legit source for folks about what is really going on in the firearms industry and how we see it from our side of things. We are shooters too, we use the stuff we make. I'm the third guy from the left in the pic below, with the Magpul D60 mag stuffed in my double-stamper 10.5".

Pleased to meet ya'll!

PAcatalogcrew.jpg
Click to expand...
Welcome to the forum Mike. Thanks for letting us know how you heard about us
 
Hi Mike, welcome aboard. Thanks for all you folks do for the community, especially for those of us who still must live in occupied America. Far too many vendors have just written us off and it's good to know there are those of you who still do the right thing. For that you will continue to get my ( and many others) business.
 
Michael Branson said:
Hello everyone, I'm Mike at Primary Arms down in Houston, Texas. I've been with PA since September of 2015. One of our employees spotted a discussion about our reticles here at CFF so I've created an account initially just to post in that thread.

If anyone ever has a question about Primary Arms optics products, I'm your guy, as I've been writing the user manuals on all optics products released since 2016 or so. You can message me here or email me directly at [email protected]. I'm PA_Mike on AR15.com and I think I've built up a reputation over there as an enthusiastic but honest representative of my company. Ask any question and you'll get an honest answer, with a very few exceptions where I'm just not allowed to say (which factory makes our latest scope, what the focal length inside the erector assembly is, stuff like that). I can't give away the secret sauce but otherwise I try to be a legit source for folks about what is really going on in the firearms industry and how we see it from our side of things. We are shooters too, we use the stuff we make. I'm the third guy from the left in the pic below, with the Magpul D60 mag stuffed in my double-stamper 10.5".

Pleased to meet ya'll!

PAcatalogcrew.jpg
Click to expand...


I follow y’all on Instagram and comment there occasionally about some of the PA stuff I own. IG handle: HandloadsAndHoldovers

Glad to have y’all on board
 
Welcome Mike and we appreciate the presence and membership on the forum. I just opened my gun safe, looked at the Primary Arms boxes in there, and simply smiled.

It's always encouraging to see how like-minded shooters and enthusiasts always find each other on the same paths. Carolina Firearms Forum extends many welcoming hands to you and we all look forward to continued successes.
 
Michael Branson said:
Hello everyone, I'm Mike at Primary Arms down in Houston, Texas. I've been with PA since September of 2015. One of our employees spotted a discussion about our reticles here at CFF so I've created an account initially just to post in that thread.

If anyone ever has a question about Primary Arms optics products, I'm your guy, as I've been writing the user manuals on all optics products released since 2016 or so. You can message me here or email me directly at [email protected]. I'm PA_Mike on AR15.com and I think I've built up a reputation over there as an enthusiastic but honest representative of my company. Ask any question and you'll get an honest answer, with a very few exceptions where I'm just not allowed to say (which factory makes our latest scope, what the focal length inside the erector assembly is, stuff like that). I can't give away the secret sauce but otherwise I try to be a legit source for folks about what is really going on in the firearms industry and how we see it from our side of things. We are shooters too, we use the stuff we make. I'm the third guy from the left in the pic below, with the Magpul D60 mag stuffed in my double-stamper 10.5".

Pleased to meet ya'll!

PAcatalogcrew.jpg
Click to expand...

Welcome!
 
You must log in or register to reply here.
Back
Top Bottom