.

Tagging in. I want to see how it holds up. I have to use prisms too, and this makes a spitfire look yuge.
 
That might be my new 10/22 optic. Not loving the dot I have on it now. I need to give it another long range session for final judgement.
 
Last edited:
Some years back I had a Bushnell Holosight. It was really a non-ruggedized Eotech, but for half the cost of an Eotech I was pretty happy with it. If the quality follows this product I bet it's pretty nice.
 
I'm liking the mini prism! This is the first I've heard of it.

Timfoilhat said:
Some years back I had a Bushnell Holosight. It was really a non-ruggedized Eotech, but for half the cost of an Eotech I was pretty happy with it. If the quality follows this product I bet it's pretty nice.
Click to expand...
My Holosight's still running for 20+ years.
 
Last edited:
Pink_Vapor said:
I'm liking the mini prism! This is the first I've heard of it.


My Holosight's still running for20+ years.
Click to expand...
I don't doubt it. I sold mine at about 10 years old to fund an Aimpoint and got back every cent I paid for it originally.
 
Dang, couldn't pass that up.

Uhhg, now I need a barrel!
 
Last edited:
I got mine. Shipping was like 12$ but still under 150 delivered. No manual, but they don't skimp on the accessories. There's an online manual on Bushnell site.
I know Bushnell has some high end optics, as I've seen some nice precision scopes by them, but I've just mostly always associated them with cheap optics. Seen a lot of the cheap red dots, which are good for the money, but not anything I would consider. But I'm surprised by the quality feel of this thing. It has a higher end feel to it. It's very tight and well machined. Very impressed. I think I am going to have to mount it very far back as the narrow window doesn't have a ton of eye relief. But its much better than, say, an acog.
It's TINY. Daylight bright. Generous Diopter adjustment. Very clear glass. Like a super light miniature Vortex Spitfire 1x Prism.
I have no need for it, and I imagine a bigger one might slightly outperform it, but this thing is so cute I have to put it on something. It's just cool. A real bargain at that price, imo.
If you like prism sights this is well a look. Not much info on it, so we'll see how it performs and how it holds up. I have high hopes.

Thanks for the heads up on this @charliesgrave
 
I am liking mine. If there is a downside, it is that thing is so tiny I have to mount it very far back to get good field of view.
That would less of a concern for anybody that shoots tighter up with stock collapsed a bit.

IMG_0487.jpg

IMG_0499.jpg
 
Last edited:
NKD said:
I am liking mine. If there is a downside, it is that thing is so tiny I have to mount it very far back to get good field of view.
That would less of a concern for anybody that shoots tighter up with stock collapsed a bit.

View attachment 206569

View attachment 206570
Click to expand...
Stop! You're killing me. Looks great.

I have to mount my other prisms all the way back also.
 
  • Like
Reactions: NKD
I could see one of these as really good for a pistol build or the like. I generally like having back up irons, but that does look so tiny that it would need to be put way back like NKD has it.
 
NKD said:
I am liking mine. If there is a downside, it is that thing is so tiny I have to mount it very far back to get good field of view.
That would less of a concern for anybody that shoots tighter up with stock collapsed a bit.

View attachment 206569

View attachment 206570
Click to expand...

I moved mine forward to where I normally put an optic. Works just fine there.
 
  • Like
Reactions: NKD
Lil P finally arrived today.

I CAN'T BELIEVE HOW SMALL IT IS.

It's a Barbie scope.

"It is like looking into a straw." is a comment from an owner on another board and boy he's not kidding.

But I wanted it because of the weight and it is super light. 4.5 oz using the high rise mount. Can't wait to try it out.
 
I may have to try one of these tiny optics on my AR pistol, would appreciate the weight savings over the Aimpoint that currently sits on it. I'm not sure how I feel about the Miami Vice themed AR but my daughter said it was cute.
 
charliesgrave said:
etAmT6u.jpg


I put my second one on an AR. It's replacing an Eotech, and the weight reduction is extremely noticeable.
It does have to sit back a little further, but it's not problem for me. Honestly, it's probably about where the Eotech back end would sit anyway.
Click to expand...

If I buy you Krylon, will you paint that thing? LOL. Thanks for the write up, Ill def put this one on the purchase list.
 
That rifle says one thing to me: "This is a brave man who gives zero effs".

Lolz.
 
charliesgrave said:
Heads up for anyone looking, Natchez finally dropped a discount code.
P200617 will get 10% off $99+. Expires the 23rd. I tried it on the Lil P and it works.
Click to expand...

Ordered today and just now got a tracking number.

Schweet.
 
  • Like
Reactions: NKD
charliesgrave said:
Got my first dud today. This is the third one I've ordered.

For some reason, the eye adjustment on this one is wonky, and while my other two can be focused properly to allow both eyes open shooting, this third one does not. I'm not even sure if this is something Bushnell will warranty, but I'm going to give it a try.
Click to expand...
charliesgrave said:
Got my first dud today. This is the third one I've ordered.

For some reason, the eye adjustment on this one is wonky, and while my other two can be focused properly to allow both eyes open shooting, this third one does not. I'm not even sure if this is something Bushnell will warranty, but I'm going to give it a try.
Click to expand...
Good luck. Hope it works out for you.
 
The paint job might have damaged the optics :)
 
  • Like
Reactions: NKD
charliesgrave said:
What bothers me is why no one is trying to do something similar. A small, light, true 1x no nonsense prism sight. Primary Arms is probably the closest with thier compact SLx, but IMHO, the ACCS reticles suck.
Click to expand...

I agree with this word for word.
1x prism sights are awesome. Reticle design is critical though.

You'd think there would be tons of options.
 
Has anyone had a problem getting this sight to tighten down on pic rail? I tried it on a CX4 and it would not tighten. Rail is probably out of spec.


Sent from my iPhone using Tapatalk
 
Last edited:
DickFord said:
Has anyone had a problem getting this sight to tighten down on pic rail? I tried it on a CX4 and it would not tighten. Rail is probably out of spec.


Sent from my iPhone using Tapatalk
Click to expand...
I had the same problem with one of mine.
My gunsmith said the side that clamps down on mine had too much material. He ground a little off and it tightens down fine now.
 
Anybody close to Charlotte have one of these?

Any Natchez codes that actually work?
 
Just grasping at straws here…

DickFord said:
Thanks. Just ordered one.
Click to expand...
NKD said:
Dang, couldn't pass that up.

Uhhg, now I need a barrel!
Click to expand...
bigfelipe said:
Got mine recently. Really like it... So small but still seems almost overbuilt. A little tank of an optic.
Click to expand...
jimmyheadgear said:
Lil P finally arrived today.

I CAN'T BELIEVE HOW SMALL IT IS.

It's a Barbie scope.

"It is like looking into a straw." is a comment from an owner on another board and boy he's not kidding.

But I wanted it because of the weight and it is super light. 4.5 oz using the high rise mount. Can't wait to try it out.
Click to expand...
charliesgrave said:
Got my first dud today. This is the third one I've ordered.

For some reason, the eye adjustment on this one is wonky, and while my other two can be focused properly to allow both eyes open shooting, this third one does not. I'm not even sure if this is something Bushnell will warranty, but I'm going to give it a try.
Click to expand...

Any of you, or anybody else, have one of these you don’t want but haven’t taken the time to list I the BST? I want one with a low mount for my PS90 SBR, but they’ve been discontinued. I remembered this thread and thought I’d check with those that posted they bought one.
 
BigWaylon said:
Just grasping at straws here…







Any of you, or anybody else, have one of these you don’t want but haven’t taken the time to list I the BST? I want one with a low mount for my PS90 SBR, but they’ve been discontinued. I remembered this thread and thought I’d check with those that posted they bought one.
Click to expand...

Sold mine man.
 
NKD said:
Sold mine man.
Click to expand...
Now that You mention it…I think you sold it to me. That’s where my second one came from. 🤣
 
You must log in or register to reply here.
Back
Top Bottom