Identification?

Charles

Member
Joined
Dec 16, 2016
Messages
590
Location
Burlington, NC
Rating - 100%
26   0   0
I’m usually pretty good with uppers, barrels, BCG, etc as far as identifying the manufacturers.. but this entire upper has me stumped.

The upper has zero markings, same with the BCG and Handguard. The only marking on the barrel reads 5.56 NATO 1/7.

The BCG is VERY cleanly chrome lined, as is the gas key, and the gas key is properly staked. The upper is finished well on the outside, but isn’t perfect inside, and again neither have any markings. The handguard I expect to be cheap as it’s a glossier finish than most. The barrel is chrome lined, M4 feed ramps, and is very clean inside and out, and finished well. Any clues?

F3171610-9C78-4032-92A2-925422C07977.jpeg Pic of barrel stamp..A334D43B-925C-4E02-921B-8CF73261B39A.jpeg D0AC4E3C-3713-4CE9-8551-6C338D2DAFD3.jpeg 841314EF-C811-4D43-AF8F-9A702BF5C2E4.jpeg 4CEDB803-6054-4E24-A664-4EE8F596B03C.jpeg No, there aren’t any markings under the MBUS.8DEA0EE5-61D7-49B4-B6A7-62F714E0E78C.jpeg
 
The location and font of the barrel markings are similar to Bushmaster, but no idea on the rest.
 
Back
Top Bottom