Milled Bulgarian Stock Options

brentona

Well-Known Member
Joined
Mar 17, 2017
Messages
652
Location
West Ashley, Charleston, SC.
Rating - 100%
9   0   0
I just received an Arsenal SLR95. It is a milled Bulgarian with a single tab not too and bottom for stock attachment. I would like to attach a plain black polymer stock to it. Is there a specific one that works well with the single tab without welding a bottom tab on? There is always the option of Ironwood Designs furniture, but I think I’m going to keep this one scary and black. Any guidance would be appreciated. Thank you!!



Sent from my iPhone using Tapatalk
 
A few companies make M4 stock adapters for the 93/95 series rifles, if you wanted to go that route. You wouldn't need to install the second tang.

Unless it's prohibitive budget-wise, I'd look for a lower tang and have a competent gunsmith add it. There are lots of DIY threads as well on the various AK internet forums. That's an extra step that would take some time and money, but it would open the door for you for a lot of traditional milled AK stock options.
 
A few companies make M4 stock adapters for the 93/95 series rifles, if you wanted to go that route. You wouldn't need to install the second tang.

Unless it's prohibitive budget-wise, I'd look for a lower tang and have a competent gunsmith add it. There are lots of DIY threads as well on the various AK internet forums. That's an extra step that would take some time and money, but it would open the door for you for a lot of traditional milled AK stock options.

That’s what I figured would be the case. The previous owner has a BCM stock on it currently so it’s not that dreaded thumbhole at least!! I just was exploring options before a gunsmith got involved. I’ll live with it in its current configuration until such a time I’m ready to have some Smith work done. I appreciate your response!


Sent from my iPhone using Tapatalk
 
Back
Top Bottom