Show off your reloading room

Think I already showed ya mine. Here's the main bench, closet storage, and the little table I built for the Dillon. Love having this inside after years of loading in the garage

a77c19f9eae9abc246b40236509fc7b8.jpg
8fbfc39830d4163e744b089fbd55b7e7.jpg
0d024f1394518bb342bb75df32e798df.jpg


Sent from my ONEPLUS A3000 using Tapatalk
 
mckenziedrums said:
Think I already showed ya mine. Here's the main bench, closet storage, and the little table I built for the Dillon. Love having this inside after years of loading in the garage

a77c19f9eae9abc246b40236509fc7b8.jpg
8fbfc39830d4163e744b089fbd55b7e7.jpg
0d024f1394518bb342bb75df32e798df.jpg


Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...


Gaaaa...What a neatnick! :)
 
I'd be excited to reload in the garage but the wife is using it as a 24x24 storage shed. I get a piece of the real storage shed and it doesn't have any electricity so no lights, heat, or air.
 
It's crowded, but I've got a lot of stuff in a small space. Pretty much everything I use for reloading (except for my tumblers) is in or on this less than 6 foot wide desk. I also keep range bags, spotting scope, tripods, chrono, etc there.Bench.JPG
 
Last edited:
Curmudgeon said:
I'd be excited to reload in the garage but the wife is using it as a 24x24 storage shed. I get a piece of the real storage shed and it doesn't have any electricity so no lights, heat, or air.
Click to expand...

I reloaded in the storage shed for a couple of years. Then finally moved into the garage when we bought a new house. The next house we buy WILL have a room for me to reload in. I cannot wait to move it inside a truly climate controlled area.
 
Started out with some Lee handloader kits (.41 mag)


Then mounted a RCBS RS2 on a folding table for years. Back in 10' my wife built me my 16x20 2 story mancave when I was is in Astan. Mounted that RS2 on the right, Redding Powder Throw, Dillion 550B, MEC 600 Jr, Lyman 450 Sizer/Lub. Do lots of boolit casting on the left. Picture was taken when setting up, unrecognitizable now. Range is to the far right on the outside of the building :)


reloading_room2.JPG



CD
 
Last edited:
Combat Diver said:
Started out with some Lee handloader kits (.41 mag)


Then mounted a RCBS RS2 on a folding table for years. Back in 10' my wife built me my 16x20 2 story mancave when I was is in Astan. Mounted that RS2 on the right, Redding Powder Throw, Dillion 550B, MEC 600 Jr, Lyman 450 Sizer/Lub. Do lots of boolit casting on the left. Picture was taken when setting up, unrecognitizable now. Range is to the far left on the outside of the building :)


reloading_room2.JPG



CD
Click to expand...

VERY NICE! I too started with a Lee Loader and still use them for several calibers to this day. They make great, consistent ammo but are painfully slow.
 
reload_room.JPG

It is normally a little cleaner than this. :p This is my mancave, or doghouse, depending on the current situation. 12x20 prefab shed that I insulated, wired, etc. I leave the window AC set to a comfortable temp, it runs as necessary. It also keeps the humidity down. Winter time I have an oil filled radiator, set to the lowest setting (600w) and connected to a thermostat set to 55 degrees.
 
Last edited:
RR3.png It's a little cluttered, upper bench for reloading, lower bench for cleaning/working on guns. Upper bench has one of my Rock Chuckers and an Inline Fabrication Quick Mount for Square Deal B's, Luber Sizer, Bench primer, etc....[/ATTACH] RR1.png RR2.png
 
Last edited:
^^^^^^^^^

That is badassery at it's finest. I like it.;)
 
You must log in or register to reply here.
Back
Top Bottom