What have you recently purchased that is firearms related?

Altamont Boot Grips arrived for my S&W 13. Perfect fit and finish. They feel great in the hand. Much better than the factory grips. Why did I wait so long?

PjNmcq4.jpg


OABDaET.jpg


bpGnaJA.jpg


CnPRdac.jpg
 
Last edited:
wvsig said:
Where did you get them from? I recommend Greg Cote. I placed an order last night and already have a tracking number.

They will work 100%. Just watch the springs. In order to get the extra 2 rounds in there they removed the plastic under the follower that prevents tilting on the factory mags which are made by Mecgar. Some people report after high round counts the springs weaken enough to allow the follower to tilt. Has not happened to me. This is how Mecgar add additional rounds to their +2 designs.

https://gregcotellc.com/cart/index.php

https://gregcotellc.com/cart/browni...gent-br9-15-rd-9mm-blued-mgbrhp15b-p-583.html
Click to expand...

These mags already arrived. Greg Cote is the go to source for mags!
 
Last edited:
Tenicor Velo for my G19. By far the best purpose built AIWB holster I’ve used. My G19 pretty much disappears under a T-shirt and carries way better and more comfortable than my P10S did in the Vedder Light Tuck. I thought the wedge was going to be uncomfortable but it fits nicely in the crease of my thigh an pelvis. Sitting, driving, no issue. Well worth the money.
7e778bdcf4e04a557c58b53c7d76cd4c.jpg


99a0a4688110ecccbb0ac2dda3dca479.jpg

44c8130a6e0477394804a7390b4cc9b2.jpg



Sent from my iPhone using Tapatalk
 
Damn_Yankee said:
Tenicor Velo for my G19. By far the best purpose built AIWB holster I’ve used. My G19 pretty much disappears under a T-shirt and carries way better and more comfortable than my P10S did in the Vedder Light Tuck. I thought the wedge was going to be uncomfortable but it fits nicely in the crease of my thigh an pelvis. Sitting, driving, no issue. Well worth the money.
7e778bdcf4e04a557c58b53c7d76cd4c.jpg


99a0a4688110ecccbb0ac2dda3dca479.jpg

44c8130a6e0477394804a7390b4cc9b2.jpg



Sent from my iPhone using Tapatalk
Click to expand...

Is that a Glock in your pants or are you just happy to see me. LOL
 
BatteryOaksBilly said:
Gun Broker Item Number..876538332

I was assisted in this chase by @wvsig!! Thanks for pointing it out Pard!!!
Click to expand...

If you look closely at the second picture you will notice that the gun does not have a factory barrel. Instead it has a $240 Barsto. It is also wearing a pair of Trijicon night sights in the MKIII dovetails. Also it has a C&S type II commander hammer and I am willing to bet it has a matching C&S sear. The sights are $100 the C&S hammer and sear are $125. So the base MKIII cost Billy $355 not accounting for the fitting of the barrel and the parts.

pix979458829.jpg


pix327284368.jpg
 
Last edited:
Had to go to MUSC, on the way back i stopped at Palmetto State, I was going to buy a stack of lowers. They didn't have any. Sucks.
 
wvsig said:
If you look closely at the second picture you will notice that the gun does not have a factory barrel. Instead it has a $240 Barsto. It is also wearing a pair of Trijicon night sights in the MKIII dovetails. Also it has a C&S type II commander hammer and I am willing to bet it has a matching C&S sear. The sights are $100 the C&S hammer and sear are $125. So the base MKIII cost Billy $355 not accounting for the fitting of the barrel and the parts.

pix979458829.jpg


pix327284368.jpg
Click to expand...
Soon as it gets here those Condoms gotta GO!
 
I found this in my old wallet today. Receipt from one of my Walmart scores. Made me want to cry.... :(

LbsZF9Z.jpg


xEcLOLz.jpg
 
It should be WalMart crying, having sold it at those prices. ;)
 
Bought into the beretta sale.
bought a couple more APX mags, a u22 mag, another 30rd 92/CX4 mag...
and a threaded APX barrel, for libraries and such.
Of course, all of it showed up right after I finished shooting. or maybe during. i dunno, it was hard to hear over the 400rds we went through.
special occasions cost a lot of ammo :(
 
Range holster for the Beretta Elite LTT Compact. I put it through its paces a bit and I think it is going to stay.
 
K Rich said:
What?!?! Asking price?

Just kidding. Beautiful!!
Click to expand...

I’m pretty excited about it. I have an optic to put on it yet. I will say the can makes it a little front heavier than I anticipated.
 
Stick Man said:
Yes sir.

Sent from my moto g power (XT2041DL) using Tapatalk
Click to expand...

Solid. Looks like a nice MKII. Rib on the top of the slide. Hog nose bushing, ambi safety laynard ring etc... Did they remove the magazine disconnect? If they did not consider it and if you do replace the trigger return spring with the heavier 3 coil spring.

I recommend replacing the factory grips with a set of these.

https://www.brownells.com/handgun-p.../browning-hi-power-combat-grips-prod9563.aspx

Or go the long game and get on Craig Spegels wait list.
 
wvsig said:
Solid. Looks like a nice MKII. Rib on the top of the slide. Hog nose bushing, ambi safety laynard ring etc... Did they remove the magazine disconnect? If they did not consider it and if you do replace the trigger return spring with the heavier 3 coil spring.

I recommend replacing the factory grips with a set of these.

https://www.brownells.com/handgun-p.../browning-hi-power-combat-grips-prod9563.aspx

Or go the long game and get on Craig Spegels wait list.
Click to expand...
I have no idea on the mag disconnect, I just won the auction today. I do like those grips though. Thanks for the link.

Sent from my moto g power (XT2041DL) using Tapatalk
 
You must log in or register to reply here.
Back
Top Bottom