Anyone reloading 358 Winchester?

[Bluejay75]

I know the risks in internet reloading data and I have reloading manuals.

if you have pet loads for the 358 Win please share. Might save some precious reloading components.

 

[backwoodsshooter]

I know the risks in internet reloading data and I have reloading manuals.

if you have pet loads for the 358 Win please share. Might save some precious reloading components.

gas gun or bolt?

what-

powder

projectile

case

you got?

cause my data is only for a 220gr in a gas gun

 

[Bluejay75]

Savage Model 10. 18 inch barrel. I have, 4198, 4064, 748 and 3031 available to load. I have Sierra 200 grain RN. Hornady 200 grain Spire Points. Formed Federal Gold Medal Match 308 to 358.

 

[backwoodsshooter]

Savage Model 10. 18 inch barrel. I have, 4198, 4064, 748 and 3031 available to load. I have Sierra 200 grain RN. Hornady 200 grain Spire Points. Formed Federal Gold Medal Match 308 to 358.

308 brass FL resized to 1.910

LRP Mag

220 Speer hot core

46.5gr of 4064

COAL 2.723

Locked back

49.6 of of BLC2 equivalent

CCI 250 primer

47gr- IMR4895

180gr Barnes TTSX

COAL- 2.786

that’s what i’ve done and stuck with. holds minute of bear at 100 yards

 

[Bluejay75]

I was concerned about the short brass after forming. You settled my nerves. Mine are closer to 2.000 than yours are. But still short.

 

[backwoodsshooter]

I was concerned about the short brass after forming. You settled my nerves. Mine are closer to 2.000 than yours are. But still short.

Yea I read about brass being shorter when formed from 308 brass. the NATO brass will be shorter than most other commerical brass.

But it's not really a concern until you run a projectile like the TTSX/TSX. That's why I never really use them after the few I used.

Short of it is, if you want SAMMI spec brass buy 358win stamped brass. But as long as you resize proper, the OAL of the case doesn't matter as long as the shoulder is in the right spot, even then as long as it chambers ittle fire form the rest lol.

 

[Bluejay75]

Anyone else? I’m shooting 200 grain jacketed as that’s what I have and 200 and 230 grain cast.