Got one going bad and I am fine checking tire pressure myself like I normally do. Is it possible to disable the TPMS until it is time for a new set of tires which is when I replace them? Is there a programmer that will do this that isn't thousands?
I took a piece of 2 inch pipe. Capped one end. Drilled a hole in the other cap and put a valve stem in, dropped the sensors in. Capped the other end with the valve stem cap. Pressurized the tube to 80psi. Threw it under the back seat and went on my way.
I wrote "Not a Bomb" on the side of mine to calm popo nerves.
That's what I have on mine. 3 different times hasn't been an issue.Ah, yeah, you can tell me how that worked out...
No programming needed for the piece of pipe. Put a valve stem in the side cap and glue the ends with new batteries in the sensors and inflate to whatever psi is on the door. Very common with the newer jeeps as well.I would still need a programmer to reprogram the new sensors that would be in the dummy vessel.
No programming needed for the piece of pipe. Put a valve stem in the side cap and glue the ends with new batteries in the sensors and inflate to whatever psi is on the door. Very common with the newer jeeps as well.
The sensors think they are still in the tires.
Sent from my SM-G930P using Tapatalk