Jmoser
Well-Known Member
Took out my new LCP rimfire; had 3 NIB mags and tried 4 different ammo.
CCI minimag 40 gr solid, Aguila HV 40 gr solid, Bulk Federal 36 gr, and CCI SV 40 gr.
Gun shot quite well at 15 ft with careful sight alignment; didn't bother going further this time. Even the cheap Federal ammo shot and cycled quite well.
Shot 30 rds each of the HV stuff, CCI SV stovepiped on first shot / wouldn't lock back [no surprise, just wanted to see.]
Had a few light hits, couldn't make them all pop even with multiple re-strikes. Don't normally see this with ultra reliable minimags or the Aguilas; going to strip the firing pin and check for burrs / gunk etc. Sometimes if the bullet isn't 100.0% seated even with the gun in battery enough to fire the pin just pushes the case forward a hair and robs it if energy to strike hard enough. This 'easy rack' model has a light spring, wondering if a stiffer recoil spring would help with fully going forward the last few .001"s.
Also had a few jams / failure to feed; didn't seem too get far out of the magazine. Also thinking a stronger recoil spring might help this.
Overall a neat package and still happy with it - going to tweak a couple things and see if it helps, may need a couple hundred rounds to smooth things up and improve cycling.
Off to Wolff to look for extra power recoil spring now . . . links invited if anyone has done this already.
CCI minimag 40 gr solid, Aguila HV 40 gr solid, Bulk Federal 36 gr, and CCI SV 40 gr.
Gun shot quite well at 15 ft with careful sight alignment; didn't bother going further this time. Even the cheap Federal ammo shot and cycled quite well.
Shot 30 rds each of the HV stuff, CCI SV stovepiped on first shot / wouldn't lock back [no surprise, just wanted to see.]
Had a few light hits, couldn't make them all pop even with multiple re-strikes. Don't normally see this with ultra reliable minimags or the Aguilas; going to strip the firing pin and check for burrs / gunk etc. Sometimes if the bullet isn't 100.0% seated even with the gun in battery enough to fire the pin just pushes the case forward a hair and robs it if energy to strike hard enough. This 'easy rack' model has a light spring, wondering if a stiffer recoil spring would help with fully going forward the last few .001"s.
Also had a few jams / failure to feed; didn't seem too get far out of the magazine. Also thinking a stronger recoil spring might help this.
Overall a neat package and still happy with it - going to tweak a couple things and see if it helps, may need a couple hundred rounds to smooth things up and improve cycling.
Off to Wolff to look for extra power recoil spring now . . . links invited if anyone has done this already.