Load Data- 9mm 135gr cast in 3.8in barrel CZ

[Dave951]

Anybody have a pet load that they'd be willing to share here? Plan is to load hot enough to easily make Minor but low enough to be economical and pleasant to shoot out of a CZ P01.

 

[Wolffy]

Any powder preference?

 

[Dave951]

No preference on powder. Some guys stess out over the amount it takes per load, but that's not me. I'm looking for a fairly clean, accurate load. Stress on accurate. If it takes a couple gr more of powder x vs powder y for a given bullet but powder x group size is reliably half of powder y, I'm with powder x every time.

 

[Mike Overlay]

9mm, 135gr coated lead. 3.3gr claydot @ 1.155 oal. 992 fps average
9mm, 135 plated. Exteme 3.2gr claydot @ 1.145 oal 956 fps average
9mm, 135gr coated lead. 3.4gr E-3 @ 1.135 oal. 1009 fps average

9mm, 147 L13 lead, 3.0gr E-3 @. 1.135 oal. 928 fps

 

[dave33]

Out of an XDM 5.25 using a 135 bayou Bullet, I've had good results with 3.5 WST, 3.2 e3, 3.4 n320, 3.3 titegroup, and 4.1 7625. All loads are low 130's PF with good feel and accuracy.

 

[Collo Rosso]

Really like WST with 124gr. Xtreme plated or MBC coated RN's. Works great in 45acp and 38spl/44spl lite loads also.