I know that place!
PM me your number and I’ll send you a cool video.I know that place!
Out of battery ignition ?
No idea. It’s ridden around in the truck chambered for awhile…all I did was flip the safety and pull the trigger.Primer not seated correctly? or over pressure pushing primer out?
I launched the guts of one of those downrange at the PSA range by Hilton Head once. Good times scrambling around in the sand looking for baffles.I put the 3 lug adapter on my aac Ti-rant to try out the Ruger carbine, when I pulled it off the gun and was bagging everything up,View attachment 703820
Had to scratch my head, and clean everything up.
View attachment 703821
Finally figured everything out got the stack back together and thankfully the was no rattling. Going to shoot it a few rounds then rockset the rear back together.
Replaced my buffer spring with a Sprinco red to slow the BGC down a bit as it was pretty violent suppressed. It definitely reduced the violence/recoil.
Shot some unsuppressed to make sure it still cycled. No only did it cycle, there was zero muzzle rise. Should have swapped it out ages ago.
It still has some rise when suppressed so I’m gonna swap a steel buffer weight out for a tungsten and hopefully magic happens: little to no muzzle rise suppressed and still cycling unsuppressed.
KAC part number claims an H2. It’s an 11.5 inch.What buffer are you running now? Barrel length?
10-4👍KAC part number claims an H2. It’s an 11.5 inch.
Hell yeah. So hopeful.10-4👍
I was running a 10.3 with an H2/Std carbine spring/non-adj GB, unsuppressed.
Switched to a red/H3 combo and it made a substantial difference when shooting suppressed or unsuppressed.
You remember shooting mine? Standard spring and buffer, but an AGB turned down so low it doesn’t even cycle with the can removed. I think it’s pretty soft shooting that way.@barf …Anytime👍
I have two 10.3 rigs set up identically, except for the optics. Like I mentioned before, no adjustable gas block, std spring, H2, VG6 Gamma brake. Both ran well unsuppressed, were pretty smooth and consistently threw brass at 4:00.
Once I suppressed them, they both performed the same. They were a bit more “violent” to shoot and brass was going to 2:00-2:30. Although I have neither the intention nor desire to shoot either one unsuppressed, I still wanted both to function reliably, can on or can off.
I considered an adjustable GB, but decided to make adjustments to the buffers/springs instead. I ordered both the blue/red and a couple of H3s.
First combo I tried was the blue/H2. There really wasn’t any discernable difference suppressed, but a slight improvement unsuppressed. Moved to blue/H3 and it was a bit better unsuppressed and a big difference unsuppressed. Went with the red/H3 next and there was marked improvement both with and especially, without the can. Soft shooting (imo) and consistent ejection to 3:30.
I have a 14.5 rig I was running with a std spring/carbine buffer. Just for kicks, I put the blue in and ran it with an H2…decided to stick with that combo for it👍
I’m happy to hear the H3 and Sprinco Red works on the 10.3 (I’m building one now!) I think it’ll be the bees knees on the 11.5 as well.@barf …Anytime👍
I have two 10.3 rigs set up identically, except for the optics. Like I mentioned before, no adjustable gas block, std spring, H2, VG6 Gamma brake. Both ran well unsuppressed, were pretty smooth and consistently threw brass at 4:00.
Once I suppressed them, they both performed the same. They were a bit more “violent” to shoot and brass was going to 2:00-2:30. Although I have neither the intention nor desire to shoot either one unsuppressed, I still wanted both to function reliably, can on or can off.
I considered an adjustable GB, but decided to make adjustments to the buffers/springs instead. I ordered both the blue/red and a couple of H3s.
First combo I tried was the blue/H2. There really wasn’t any discernable difference suppressed, but a slight improvement unsuppressed. Moved to blue/H3 and it was a bit better unsuppressed and a big difference unsuppressed. Went with the red/H3 next and there was marked improvement both with and especially, without the can. Soft shooting (imo) and consistent ejection to 3:30.
I have a 14.5 rig I was running with a std spring/carbine buffer. Just for kicks, I put the blue in and ran it with an H2…decided to stick with that combo for it👍
It still. Cycles. Unsuppressed. With an H3 and Red spring. I might order an orange. I’m gonna take it to the edge.@barf …Anytime👍
I have two 10.3 rigs set up identically, except for the optics. Like I mentioned before, no adjustable gas block, std spring, H2, VG6 Gamma brake. Both ran well unsuppressed, were pretty smooth and consistently threw brass at 4:00.
Once I suppressed them, they both performed the same. They were a bit more “violent” to shoot and brass was going to 2:00-2:30. Although I have neither the intention nor desire to shoot either one unsuppressed, I still wanted both to function reliably, can on or can off.
I considered an adjustable GB, but decided to make adjustments to the buffers/springs instead. I ordered both the blue/red and a couple of H3s.
First combo I tried was the blue/H2. There really wasn’t any discernable difference suppressed, but a slight improvement unsuppressed. Moved to blue/H3 and it was a bit better unsuppressed and a big difference unsuppressed. Went with the red/H3 next and there was marked improvement both with and especially, without the can. Soft shooting (imo) and consistent ejection to 3:30.
I have a 14.5 rig I was running with a std spring/carbine buffer. Just for kicks, I put the blue in and ran it with an H2…decided to stick with that combo for it👍
Lemme know how it does…I may do the same.It still. Cycles. Unsuppressed. With an H3 and Red spring. I might order an orange. I’m gonna take it to the edge.
11.5 SR15Lemme know how it does…I may do the same.
What barrel are you using? 10.3, right?
#221 Knights Armament CQB👍
Was wondering about barrel specs….mfr, length, port size.
He likely forgot.You’re in good company, neither does @amnesia lol
Monkey business.I just realized I've never shot my NFA item lol