Truthfully it just might.Yes I know that is a Trauma form, but it would make a great target!!
Yes, but did the patient live or die?Here is a way to score this as a target: Take 11 shots. Score is the number of rings you broke (10 rings and the center dot). For tiebreaker, add up the numbers for each ring hit, with 15 for the center dot, so score both ways - 0-11 and the sum of ring values.
You measuring the outer rings of bullseye I imagine.Just for reference. Printing is very tricky on this one. The full page targets I printed had the following measurements with digital calipers. Top target .40 inches. Middle targets .45 inches. Bottom targets .56 inches. If you get close to this, let me know.
See post 7… I printed from the picture.Just for reference. Printing is very tricky on this one. The full page targets I printed had the following measurements with digital calipers. Top target .40 inches. Middle targets .45 inches. Bottom targets .56 inches. If you get close to this, let me know.
Good shooting but yes, if we are only scoring doubles as not touching line then I think these need to be re scored.Just getting to post these. Also, I scored these the first day assuming staying inside the black outer edge, so I will also score them for not breaking the outer black ring also below.
All were shot with my usual CZ 457. It rained early, so the target board was a little wet. Only affected one card, which has some wonky holes in a few places. Otherwise, a good target board and card stock help your target have clean holes.
First pic is just them all together, so you can ignore it.
#1 - Score says 34 outer edge scoring (but missed counting a duck on the top row. With outer edge scoring, it would be a 40 outer edge. Inner edge scoring would be 31, after taking targets 1,3,4 lose double points.
#2 - 37 outer edge, 35 inner edge. Target 2 on row 2 is the only target to lose double points.
#3 - 35 outer edge, 32 inner edge. Target 4 on row 1 would lose double points.
#4 - 42 outer edge, 35 inner edge. Targets 1 on top row and 1 and 2 on row 2 lose double points.
It does suck that there are so many versions being used. I printed the one that was posted in this thread first.
View attachment 642321
View attachment 642322
View attachment 642323
View attachment 642324
View attachment 642325
I am also getting these same measurements on mine that I posted.See post 7… I printed from the picture.
When I print it, those top targets are 0.45". The middle ones are 0.5" and the bottom are around 0.63". The inside rings (outside of the black ring around the red appears to be 0.2", 0.22", 0.275",
Mine is the same as Smokey’s.I feel bad about the sizing issue. Smokey has posted the size he is shooting. If we can all shoot similar targets, then we can get some competition going for July. All mine are smaller, so I will reprint, trying to get a match. .45 top, .50 middle and .63 bottom. By the way Smok3y, nice shooting!
I will update the scores on those pics. For now the new scores are at least in the body of the message, but I will clean it up.Ok Shooters, we are going to extend this target through August since we have had such issues with sizing.
Please pm me with you name and address if you are not able to print the correct size and I will send you a correct sized target that you can copy. Correct size should be top target 0.45". The middle ones are 0.5" and the bottom are around 0.63". The inside rings (outside of the black ring around the red appears to be 0.2", 0.22", 0.275”.
If your target is not about that size then please do not post. Right now I think @Smok3y and I are the only ones with correct size.
@Smok3y, take a look at your posted targets and rescore if need be. Double points are only counted if the black line was not broken.
We will be shooting this target till end of August now. PM me your address info and I will send you a target if yours is not printing at the correct size.I'm probably not going to get this done this month. New puppy has my attention trying to get her to potty on target this month.
I put a riser on my stock in a specific spot. The rear edge of it wedges into my face where my jaw hinges on my skull. It's totally repeatable. You should try something like that...maybe wrap the comb with an elastic bandage and put a cotton ball under it to create a tactile point of reference.Still having issues looking through the scope In between mags. Still a lousy 29. Won’t have another chance to shoot for a few weeks now.
View attachment 648462
With that score it won’t matter… good shootingAs long as these matches use 8.5x11 paper, AND the picture of our targets show the entire target (all 4 corners show in the picture), the matches oughta be good enough.
you could request everyone to take the pictures with the ruler on the target, but getting the 4 corners in the entry picture oughta be good enough.
View attachment 651817
A tip of the cap to you sir. Having shot this target, that is some real nice shooting. I'm just trying to get one that I'm not embarrassed to post.As long as these matches use 8.5x11 paper, AND the picture of our targets show the entire target (all 4 corners show in the picture), the matches oughta be good enough.
you could request everyone to take the pictures with the ruler on the target, but getting the 4 corners in the entry picture oughta be good enough.
View attachment 651817