amnesia
.
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Life Member
Supporting Member
Multi-Factor Enabled
Ok I finally found a cmr30. Waiting on it to arrive at my ffl.
Few questions:
Anyone SBR one of these before? I know they do not recommend putting a suppressor on the pmr30 because of blowback. Wondering if this would run into the same issue.
Anywho, what can should I put on the end? My goal is to cut the barrel down. I will pin and weld the can to 16 inches oal so it's only a one stamp gun. Can needs to be user servicible.
Tagging
@BigWaylon because I'm sure you have some ideas.
And
@jkupp2000 because I'll get said can from you.
Few questions:
Anyone SBR one of these before? I know they do not recommend putting a suppressor on the pmr30 because of blowback. Wondering if this would run into the same issue.
Anywho, what can should I put on the end? My goal is to cut the barrel down. I will pin and weld the can to 16 inches oal so it's only a one stamp gun. Can needs to be user servicible.
Tagging
@BigWaylon because I'm sure you have some ideas.
And
@jkupp2000 because I'll get said can from you.
Last edited: