SBR CZ Scorpion

BurnedOutGeek said:
POS trigger pack screw stripped out on me, whatever gorillas put that thing in with a friggin air hammer and lock-tite needs to be kicked in the beanbag

If anyone runs into the same problem, here it is:

https://www.mcmaster.com/#93070a101/=znl730
Click to expand...
Apparently I got lucky and mine is welded upon closer inspection. Good times.

Drill time!
 
Jerzsubbie said:
My Scorpion SBR. [IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i764.photobucket.com\/albums\/xx282\/jaston87\/Guns\/CZ20Scorpion20Evo320SBR1_zpsbge4vcmj.jpg"}[/IMG2]

HBI trigger spring kit
HBI Aluminum safety set
922r kit
Octane 9 HD
SiCo fixed 18x1 adapter
THSF engraving (doesn't get much better)

Need a grip (the pathfinder looks like the best thing going) and the OE pistol MLOK handguard. A drop in trigger like a 4.5lb CMC would be awesome but I'm not holding my breath.

Edit: [posted after nclivingbrit's comment haha]
My wife shooting 4rd into dirt then 2rd on steel.
[video=youtube_share;9A4m_ld_RNM]https://youtu.be/9A4m_ld_RNM[/video]
Click to expand...
very nice, look similar to mine.
 
My current SBR configration:

- HBI Theta Forward Trigger Red
- HBI S1 Reduced Weight Trigger Spring Kit
- HBI Theta Extended Charging Handle Red
- HBI AK Style Safety Selector
- HBI Left Safety Delete V2
- Primary Arm Red Dot
- CZ Compliant Kit
- Magpul XTM Hand Stop Kit
- GEMTECH Multimount
- GEMTECH Rear Threadmount
- M18 x 1 RH to 1/2 x 28
- Laser engraved SBR

Future Modes includes:
- New Grip
- Mag paddle
- Sights
f4be9750-1a1f-42b1-9176-1f769c3781ad_zpsmhx9kval.jpg
 
Last edited:
Ok this spring is BS - anyone open to me bring the pieces to them to help me?
 
amnesia;56514 said:
Ok this spring is BS - anyone open to me bring the pieces to them to help me?
Click to expand...
You talking bout the HBI Spring kit? If you're near Charlotte bring it to me and I'll help you out. If not near Charlotte you can ship to me and I'll install it for you.

Sent from my SM-N910V using Tapatalk
 
Wahoo95;56639 said:
You talking bout the HBI Spring kit? If you're near Charlotte bring it to me and I'll help you out

Sent from my SM-N910V using Tapatalk
Click to expand...
I finally got this thing in. It only took me an hour and 1/2. :( I had to redo it a few times because I got it wrong. Last piece I need to buy is the charging handle.

7e431d7c78517529a8dc9e608deffa6d.jpg
324369a50f020e0a43c84e5830def2da.jpg
be74ef8efec6b866d3c878b9030d0bef.jpg


Sent from my SM-G935V using Tapatalk
 
FarpinDar said:
I bought this mag loader and it has been working fine. Net very fast but easier on the fingers:
Click to expand...
Djstorm100 I'll test one out for you. I'm sure you can sell them $20 a piece. The yetiwerks one appears to be 3d printed.
 
Thanks

Shooters element trigger
Shooters element 6 lbs trigger springs
Apex tactical grip
https://store.apextactical.com/WebDirect/Products/Details/192400

I'm not 100% on this one yet. I need to shoot it.

Yetiwerks extended mag paddle
I'm probably going to buy the shooters element extended charging handle to match.


Sent from my SM-G935V using Tapatalk
 
Here's my Scorpion SBR as it sits now!

czscorpion-1.jpg

czscorpion-2.jpg


Some of the more notable pieces on it:
• Side Project Folding Hinge w/ Zhukov Stock
• YetiWurks Matterhorn Grip
• Holoson 403 Paralow
• Magpul MVG
• HBI Trigger
• Gearhead Works Paddle Release
• Parker Mountain Machine QD Mount
• CZ Carbine Length Handguard
• Manticore Arms 3-lug Adapter
• SilencerCo Octane 45HD Suppressor
 
davekeller;n61941 said:
Here's my Scorpion SBR as it sits now!

czscorpion-1.jpg

czscorpion-2.jpg


Some of the more notable pieces on it:
• Side Project Folding Hinge w/ Zhukov Stock
• YetiWurks Matterhorn Grip
• Holoson 403 Paralow
• Magpul MVG
• HBI Trigger
• Gearhead Works Paddle Release
• Parker Mountain Machine QD Mount
• CZ Carbine Length Handguard
• Manticore Arms 3-lug Adapter
• SilencerCo Octane 45HD Suppressor
Click to expand...

Looks good! The Zhukov is the only other stock I really think fits the gun well aesthetically.
How long is that barrel? Looks like a lot of suppressor stick out of the handguard.
 
Jerzsubbie;n63496 said:
Looks good! The Zhukov is the only other stock I really think fits the gun well aesthetically.
How long is that barrel? Looks like a lot of suppressor stick out of the handguard.
Click to expand...

I forget but it's the stock barrel that came on the pistol which is like 7.72" but the Octane 45HD sticks out a bit. I'd love to tuck an Omega 9K down there.
 
davekeller;n63526 said:
I forget but it's the stock barrel that came on the pistol which is like 7.72" but the Octane 45HD sticks out a bit. I'd love to tuck an Omega 9K down there.
Click to expand...

Ahh I see now that I'm on my pc. It looks like there is a couple inches from the wrench flats to bottom of can. That added length of the 3 lug setup is what turned me off to the idea, but it certainly is convenient.
 
Jerzsubbie;n64070 said:
Ahh I see now that I'm on my pc. It looks like there is a couple inches from the wrench flats to bottom of can. That added length of the 3 lug setup is what turned me off to the idea, but it certainly is convenient.
Click to expand...

Yeah, I wish the 3-lug didn't make it so long but with an Omega 9k, it'll be just enough to clear with the 3-lug attached. I love running the 3-lug since I don't have to worry about tightening down the can every now and then.
 
If anyone is on the fence about which grip to get and really like and AR grip angle, the Yeti Wurks Switchback is worth the price tag. Very close to an MOE angle and feel just different texture.
DFE9879F-D78E-499F-8C3D-E11754E9C030_zpsz7fmxtjj.jpg

C4C418FE-A2F7-4F2A-82CA-6C129238F739_zps7kgoz2gx.jpg

9D219881-079C-4C5A-9CFF-8FA4723C2BD9_zpsmmcts25q.jpg


I actually tried fabricating an adapter to use an MOE grip, but it's not possible to execute well without modifying the grip since the CZ grip lug is wider than an AR and sits a little low.

I just need a charging handle now, and possibly a shooters element trigger shoe. Then I need to get these damn side rails milled off since no one offers a smooth polymer pistol handguard.
 
Added some new parts:

Yeti Wurks Everest Grip
Yeti Wurks Denali QD Point
Yeti Wurks Scorpion Evo III Avalanche Mag release
Parker Mountain Machining Left Rear QD Sling Mount

Grip and mag release makes a world of different. I'm looking into upgrading the HBI handguard.

DSC_0011_1_zps321t87cm.jpg


DSC_0001_1_zpsuyp2n7qk.jpg


DSC_0008_1_zpsbsyymjrj.jpg


DSC_0041_1_zpsz8podxsi.jpg


DSC_0050_1_zpssafz1kaw.jpg
 
davekeller said:
Here's my Scorpion SBR as it sits now!

czscorpion-1.jpg

czscorpion-2.jpg
Click to expand...
Do you have any issues shooting it without the suppressor? I'm about the to submit my paperwork to convert my Scorpion carbine into a SBR. I will be using with and without a suppressor. With a really short barrel it looks like one could get some powder burns if you grip to far out on the handguard.
 
Last edited by a moderator:
Average Joe said:
Do you have any issues shooting it without the suppressor? I'm about the to submit my paperwork to convert my Scorpion carbine into a SBR. I will be using with and without a suppressor. With a really short barrel it looks like one could get some powder burns if you grip to far out on the handguard.
Click to expand...

I don't shoot it without the can because the barrel is under the handguard.
 
davekeller said:
I don't shoot it without the can because the barrel is under the handguard.
Click to expand...

I was concerned about the safety aspect as well. Thanks for your thoughts. It looks great by the way!


Sent from my iPhone using Tapatalk
 
I like the carbine forend and understand it is Available from CZ.

What would be less expensive as the basis of an SBR build: pistol or carbine? Assuming I wanted to add the CZ stock and forend to a pistol?

I don't think I would care for the pistol while I wait for a stamp but I liked the carbine I handled.
 
Crunchy Frog said:
I like the carbine forend and understand it is Available from CZ.

What would be less expensive as the basis of an SBR build: pistol or carbine? Assuming I wanted to add the CZ stock and forend to a pistol?

I don't think I would care for the pistol while I wait for a stamp but I liked the carbine I handled.
Click to expand...

I didn't price it out to see which would be cheaper. Like you, I liked the carbine hand guard and I wanted to shoot it while I waited for the tax stamp. So I just went with the carbine. Haven't regretted that choice at all. It is fun and a smooth shooting gun. Only problem you will have is keeping ammo in stocked up!
 
Last edited:
Anyone using any HSGI extended pistol tacos for their mags?
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom