hdrolling
Well-Known Member
Here is what I have ordered so far:
20" Faxon barrel , 416R stainless coated in QPQ nitride. 1:8, 5R-EE, button-rifled
Lehigh Defense/Millennium Manufacturing's 6.5 "Monster" bolt
Sionics NP3 coated bolt carrier w/ firing pin, NP3 coated cam pin and firing pin retaining pin
Noveske marked VLTOR MUR upper with forward assist
Noveske 16.5" NSR handguard
Noveske low pro gas block
Black WMD rifle length gas tube
I already have a BCM comp mod 1 that I removed from my 300 blk than I plan to use for now.
If all these parts come in before I get paid again I use the lower off my DDM4V11 PRO that already has a PRS stock and Geissele SSA-E trigger in it to go test the upper out.
Here's the 6.5 bolt with the Grendel "monster"
LD_Bolt_Laser_Sample_Silver by hd_rolling, on Flickr
tdhhh by hd_rolling, on Flickr
20" Faxon barrel , 416R stainless coated in QPQ nitride. 1:8, 5R-EE, button-rifled
Lehigh Defense/Millennium Manufacturing's 6.5 "Monster" bolt
Sionics NP3 coated bolt carrier w/ firing pin, NP3 coated cam pin and firing pin retaining pin
Noveske marked VLTOR MUR upper with forward assist
Noveske 16.5" NSR handguard
Noveske low pro gas block
Black WMD rifle length gas tube
I already have a BCM comp mod 1 that I removed from my 300 blk than I plan to use for now.
If all these parts come in before I get paid again I use the lower off my DDM4V11 PRO that already has a PRS stock and Geissele SSA-E trigger in it to go test the upper out.
Here's the 6.5 bolt with the Grendel "monster"
LD_Bolt_Laser_Sample_Silver by hd_rolling, on Flickr
tdhhh by hd_rolling, on Flickr
Last edited: